eqcd 040 01?2.00 50 38 choice of 50 ? & 75 ? matched impedance systems standard strain relief housing and full housing available surface mount ground plane for full smt system 38 awg coax cable samtec usa ?tel: 1-800-samtec-9 or 812-944-6733 ?fax: 812-948-5047 samtec uk ?tel: 01236 739292 ?fax: 01236 727113 samtec asia pacific ?tel: 65-745-5955 ?fax: 65-841-1502 samtec germany ?tel: +49 (0) 89 / 89460-0 ?fax: +49 (0) 89 / 89460-299 samtec france ?tel: 01 60 95 06 60 ?fax: 01 60 95 06 61 samtec italy ?tel: 39 039 6890337 ?fax: 39 039 6890315 samtec japan ?tel: 81-424-42-8318 ?fax: 81-424-42-8319 samtec china ?tel: 86-21-5385-4089 ?fax: 86-21-5385-4047 samtec taiwan ?tel: (02) 2395-1677 ?fax: (02) 2395-1689 due to technical progress, all designs, specifications and components are subject to change without notice. factsheet f-200 eqcd positions per row female note: this series is non-standard, non-returnable. 50 = 50 ohms 75 = 75 ohms system specifications see www.samtec.com/design/ pdf_reports.asp; select eqcd mates with: qte, qse 020, 040, 060, 080, 100 (40 total positions per bank) hi-speed cable eqcd series male end assembly coax wire option assembly length xx.xx = length in inches example: 09.00 = (22,86mm) 9.00" f = gold flash. leave blank for standard plating with 10 " (0,25 m) gold r = reversed connectors 38 = 38 awg coax cable specify end assembly from chart (0,80) .0315 01 02 01 02 02 01 (10,16) .400 assembly length in inches (0,64mm) 1/4 " ((153mm) 6 inches minimum) (4,27) .168 (5,97) .235 (6,35) .250 (6,35) .250 (11,43) .450 (6,35) .250 edge-mount end assembly male male male female female edge mount 01 02 03 04 05 06 termination female edge mount male female edge mount edge mount assemblies with 0,5mm pitch, 0,635mm pitch and mictor* compatible pcb footprints also available. call samtec. *mictor is a registered trademark of the whitaker corporation also available
|